
Balines de Acero al Carbón
Los balines de Acero al Carbón son fabricados en diámetros: desde 1 mm hasta 200 mm.
– Los balines de acero al bajo carbono o llamado tambien como carbono cementado proporcionan un ahorro sustancial para aplicaciones en las que se necesiten cargas moderadas y una velocidad reducida. Las aplicaciones convencionales incluyen: Baleros, ruedas, transportadores, bicicletas, etc…
– Los balines de acero al alto en carbono tienen un tratamiento termico desde el nucleo y pueden utilizarse para cargas más elevadas. Es una opcion a los balines de cromo.
Compositions (chrome steel balls) | |||||
C | Cr | Mn | Si | P | S |
0.95 – 1.10 % | 1.30 – 1.60 % | 0.25 % Max | 0.15 – 0.35 % | 0.03 % Max | 0.025 % Max |
Mechanical Properties (chrome steel balls) | ||
Tensile Strength | Yield Strength | Density |
2240 MPa | 2034 MPa | 7.85g/cm3 |
Hardness |
HCr 60 – 66 |
Size Range |
0.250mm – 200mm |
(chrome steel balls) – Las dimensiones son indicativas |
Specification | Equivalence | Hard Density gr/cm3 | Carbon steel balls : Composition in % | |||||||
C | Si | Mn | P | S | Cr | Mo | Ni | |||
Steel | W 1.0301 | 0,07 | 0,10 | 0,30 | 0,05 | 0,05 | ||||
Carbon steel balls | AFN XC10 | 60Hrc | min | min | min | max | max | |||
AISI 1010/1015 | En32 | 0,18 | 0,40 | 0,60 | ||||||
max | max | max | ||||||||
Steel | W 1,1249 | 0,07 | 0,10 | 0,50 | 0,05 | 0,05 | ||||
Carbon steel balls | UNI C72 | 60Hrc | min | min | min | max | max | |||
AISI 1070 | AFN XC70 | 0,75 | 0,40 | 0,70 | ||||||
max | max | max | ||||||||
Steel | W 1.1830 | 0,80 | 0,25 | 0,30 | 0,03 | 0,02 | ||||
Carbon steel balls | UNI C85 | 60Hrc | min | min | min | min | max | |||
AISI 1086 | 0,90 | 0,40 | 0,70 |